Show simple item record

dc.contributor.authorQin, Huawei
dc.contributor.authorHu, Hangmin
dc.contributor.authorYe, Wei
dc.contributor.authorWang, Jianjun
dc.contributor.authorCai, Zhen
dc.contributor.authorChen, Ying
dc.date.accessioned2017-05-09T01:12:11Z
dc.date.available2017-05-09T01:12:11Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_06_061601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156210
dc.description.abstractThe hydrostatic corer is designed for sampling sediment from the seafloor. Its operation relies on a water distributing valve which converts the potential pressure difference between ambient seawater and a builtin chamber with atmospheric pressure to the dynamic energy as the driving power. As the valve is exposed to the ambient water, the deformation of its components may exceed their fitting tolerance under the high pressure and low temperature on seafloor, and thus cause the failure of the valve. Three possible failure modes have been taken into account, representing the positions where interference of fitting tolerance is likely to occur. Corresponding models are then created considering the coupled effects of pressure and temperature on the valve. Based on the model results and the reliability requirement of the corer, one failure mode is selected to calculate the reliability of the valve and is used as guidance for the future improvement of the design.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReliability Assessment of the Water Distributing Valve of a Hydrostatic Sediment Corer
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026979
dc.journal.fristpage61601
dc.journal.lastpage61601
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record