Show simple item record

dc.contributor.authorAi, Li
dc.contributor.authorYu, Xinhai
dc.contributor.authorJiang, Wenchun
dc.contributor.authorWoo, Wanchuck
dc.contributor.authorZe, Xiaofeng
dc.contributor.authorTu, Shan
dc.date.accessioned2017-05-09T01:12:11Z
dc.date.available2017-05-09T01:12:11Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_06_061403.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156208
dc.description.abstractIn this study, for the hardfacing of springloaded pressure relief valve seats, the residual stress distributions after the tungsten inert gas welding, (TIG) postwelded heat treatment and subsequent surface turning were investigated. The heat input parameters of welding were calibrated using an infrared imaging and thermocouples. The residual stress distributions were computed using threedimensional finite element model. The neutron diffraction approach was employed to verify the finite element calculation. It is found that, the surface temperature during hardfacing welding shows a double ellipsoidal shape with the highest value of around 1570 آ°C. The high residual stress zones are located exactly under the welded joint except a slight deviation in the hoop direction. The magnitudes of tensile residual stresses in the three directions increase with their corresponding locations from the root of the joint into the base metal. The residual stresses in all of the three directions decrease significantly after the heat treatment. After surface turning, the residual stresses are tensile except for those close to the inner surface that are compressive in axial and radial directions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Distribution in Hard Facing of Pressure Relief Valve Seat
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026977
dc.journal.fristpage61403
dc.journal.lastpage61403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record