Show simple item record

dc.contributor.authorMair, David
dc.date.accessioned2017-05-09T01:12:10Z
dc.date.available2017-05-09T01:12:10Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_06_061206.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156202
dc.description.abstractStress intensification factors (SIFs) are published in the piping codes for tees; branch connections where the branch intersects the header pipe at 90 deg. These factors when multiplied by the nominal stress provide a measure of the increased local stresses at the junction of the two pipes. However, in cases where the branch pipe meets the header at an angle of other than 90 deg, the main piping codes do not provide a method of calculating the SIFs. This presents a difficulty for the pipe stress engineer who must determine appropriate SIFs, usually in a conservative way and then manually enter these into the pipe stress program. This paper summarizes some of the published methods of calculating SIFs for a limited range of lateral branch connections and makes recommendations based on comparisons with finite element analysis (FEA) studies. It also includes recommendations on how such FEA studies should be applied in order to provide suitable SIF values.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Intensification Factors for Fabricated Lateral Piping Connections
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4027319
dc.journal.fristpage61206
dc.journal.lastpage61206
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record