Show simple item record

dc.contributor.authorRana, Mahendra D.
dc.contributor.authorTreadwell, David
dc.contributor.authorRamachandran, Srikanth
dc.contributor.authorKhanal, Abani K.
dc.date.accessioned2017-05-09T01:12:02Z
dc.date.available2017-05-09T01:12:02Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_04_041601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156166
dc.description.abstractSeamless pressure vessels (tubes) are designed per Department of Transportation (DOT) Specification 3AAX or 3 T. These tubes are used in overtheroad transport of high pressure gases. In tube trailer, these tubes are supported at ends from outside threaded necks. This paper describes the technical basis which was used in developing CGA C23 document, which provides guideline on inspection and evaluation of tubes neck mounting surfaces. API579/ASME FFS1 standard and test data were used in developing the guideline for acceptance rejection criteria of the tube neck containing local thin areas and thread wear, respectively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTechnical Basis for Evaluation of US DOT Seamless Pressure Vessels With Defects on Threaded Neck Used for Structural Support
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026206
dc.journal.fristpage41601
dc.journal.lastpage41601
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record