• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Comparison and Assessment of the Creep Fatigue Evaluation Methods With Notched Specimen Made of Mod.9Cr 1Mo Steel

    Thumbnail
    View/Open
    pvt_136_04_041406.pdf (2.307Mb)
    Date
    2014
    Author
    Ando, Masanori
    Hirose, Yuichi
    Karato, Takanori
    Watanabe, Sota
    Inoue, Osamu
    Kawasaki, Nobuchika
    Enuma, Yasuhiro
    Metadata
    Show full item record
    Abstract
    In components design at elevated temperature, creepfatigue is one of the most important failure modes, and assessment of creepfatigue life in structural discontinuities is an important issue in evaluating the integrity of components. Therefore, a lot of creepfatigue life evaluation methods were proposed until now. To compare and assess the evaluation methods, a series of creepfatigue test was carried out with notched specimens. All the specimens were made of Mod.9Cr1Mo steel, which is a candidate material for primary and secondary heat transport system components of the Japan sodiumcooled fast reactor (JSFR). Mechanical creepfatigue tests and thermal creepfatigue test were performed by using a conventional uniaxial push–pull fatigue test machine and a thermal gradient generating system with an induction heating. The stress concentration levels were adjusted by varying the notch radius in the each test. The creepfatigue lives, crack initiation, and propagation processes were monitored by a digital microscope and the replica method. A series of finite element analysis (FEA) was carried out to predict the number of cycles to failure by the several creepfatigue life evaluation methods. Then, these predictions were compared with the test results. Several types of evaluation methods such are stress redistribution locus (SRL) method, simple elastic followup method and the methods described in the design and constriction code for fast reactor (FR) published by the Japan Society of Mechanical Engineers (JSME FRs code) were applied. Through the comparisons, it was appeared that SRL method gave rational conservative prediction of the creepfatigue life when the factor of خ؛ = 1.6 was applied for all conditions tested in this study. A comparison of SRL method and simple elastic followup method indicated that SRL method applied factor of خ؛ = 1.6 gave the smallest creepfatigue life in practicable stress range level. The JSME FRs code gave an evaluation 70–100 times conservative lives comparing with the test results.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/156162
    Collections
    • Journal of Pressure Vessel Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV