Show simple item record

dc.contributor.authorLuo, Xiangpeng
dc.contributor.authorMa, Jinjin
dc.contributor.authorZheng, Jinyang
dc.contributor.authorShi, Jianfeng
dc.date.accessioned2017-05-09T01:12:00Z
dc.date.available2017-05-09T01:12:00Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_03_031801.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156148
dc.description.abstractPolyethylene (PE) pipes are widely used in natural gas transportation systems in urban areas nowadays. As landslide caused by earthquake would cause destructive damage to buried pipes, increasing attention is attracted to the safety of buried PE pipes under seismic load. In this paper, the deformation behavior of PE pipe subjected to seismic landslide was investigated and a related failure criterion due to yielding was proposed. Based on extensive uniaxial tensile tests, a ratedependent constitutive model of PE was applied to simulate the mechanical behavior of PE pipes. The extended DruckerPrager model was used for surrounding soil. In our proposed finite element model, a quartic polynomial bending deflection displacement normal to the pipeline was loaded along the axial direction of PE pipe. The numerical simulation results revealed that the main failure mode of buried PE pipe subjected to seismic landslide shifted from bending deformation to ovalization deformation with increasing bending deflection. On the basis of deformation behavior analysis, failure criterion curves were put forward, which depicts the maximum relative deflection of the pipe crosssection, and the maximum displacement of the pipe versus pipe length subjected to seismic landslide. The results may be referable for design and safety assessment of PE pipes due to seismic landslide.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Analysis of Buried Polyethylene Pipe Subjected to Seismic Landslide
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026148
dc.journal.fristpage31801
dc.journal.lastpage31801
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record