Show simple item record

dc.contributor.authorPous
dc.contributor.authorBhadeshia, Harry
dc.date.accessioned2017-05-09T01:11:58Z
dc.date.available2017-05-09T01:11:58Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_03_031402.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156142
dc.description.abstractAn alloy commonly used for large pressure vessels, known as SA508 Grade 3, has a microstructure after heat treatment consisting of a mixture of tempered bainite and martensite at fast cooled regions near surfaces subject to water quenching. These two phases are conventionally recognized to consist of fine platelets, each of which is approximately 0.2 خ¼m in thickness, enhancing strength and leading to good toughness properties. We have discovered in our experimental work that there are circumstances where the adjacent platelets of a similar orientation can coalesce as the austenite transforms, to produce much coarser structures which are believed to be detrimental to toughness. An examination of published micrographs reveals that such coalesced regions existed but were not noticed in previous studies. The mechanism of coalescence is described and methods to ameliorate the coarsening are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCoalesced Martensite in Pressure Vessel Steels
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026192
dc.journal.fristpage31402
dc.journal.lastpage31402
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record