Show simple item record

dc.contributor.authorOhata, Mitsuru
dc.contributor.authorKawai, Nana
dc.contributor.authorTagawa, Tetsuya
dc.contributor.authorMinami, Fumiyoshi
dc.contributor.authorYamamoto, Toshiya
dc.contributor.authorArii, Kazuaki
dc.contributor.authorNiimoto, Shinta
dc.date.accessioned2017-05-09T01:11:57Z
dc.date.available2017-05-09T01:11:57Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_03_031205.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156136
dc.description.abstractCoke drums undergo cyclic operations typically in the temperature range from ambient temperature to about 500 آ°C (930 آ°F). During quenching, the coke drum is inevitably subjected to a rapid drop in temperature because cooling water is injected directly into the coke drum through the bottom inlet nozzle. The temperature profile on the shell surface is no more uneven in quenching, and can vary in each cycle of quenching operation. Such complicate thermal profile induces large strains in the shell portion of the coke drum, and eventually causes damage like bulging or cracking. This study makes investigations into the bulging behavior of the coke drum by the thermal elasticplastic FEanalysis. In this work, a feasible study is conducted on potential causes of bulging. As factors inducing a heterogeneous plasticity in the shell structure of the coke drum, the strength overmatch of welds and the uneven temperature field in quenching as well as quenching conditions are focused. The analytical result shows that strength overmatch in girth seam welds can be one of the causes of plastic distortion under one operating cycle. The lower rising rate of cooling source can induce plastic straining over the whole shell wall, which tends to induce more remarkable plastic distortion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of Bulging Behavior of Coke Drum: Feasible Study on Causes of Bulging
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026046
dc.journal.fristpage31205
dc.journal.lastpage31205
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record