Show simple item record

dc.contributor.authorLi, Ma
dc.contributor.authorYang, Hu
dc.contributor.authorYang, Du
dc.contributor.authorJinyang, Zheng
dc.date.accessioned2017-05-09T01:11:57Z
dc.date.available2017-05-09T01:11:57Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_03_031203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156133
dc.description.abstractA rupture experiment was conducted on cylindrical explosion containment vessels (ECVs), where the fracture mode transition was observed. Microstructure examinations indicate the material GB/JB20 (AISI 1020) experienced a fibroustocleavage fracture mechanism transition with increment of loading rate. Different from fracture mechanics method, a ratedependent failure criterion is proposed to account for the dynamic fracture behavior, which is compatible with experimental observation that the material fails at low effective plastic strain when at high strain rates. A finite element analysis of a cylindrical containment vessel with different sizes of initial cracks was performed, where the overpressure caused by detonation was calculated, and the dynamic crack propagation and fracture mode transition were reproduced. In addition, a failure assessment including the estimation of limiting crack sizes corresponding to impulsive loading was conducted. It was found that a small variation of initial crack size has minor influence on the final fracture mode and profile, which is mainly dependent upon the intensity of impulsive load as well as the loading rate. The results also indicate that the crack propagates with strongly nonlinear speeding, most cracking length developed during the first structural vibration cycle.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Mode Transition for Explosively Loaded GB/JB 20 Steel Containment Vessels
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026578
dc.journal.fristpage31203
dc.journal.lastpage31203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record