Show simple item record

dc.contributor.authorCho, Doo
dc.contributor.authorChoi, Young
dc.contributor.authorHuh, Nam
dc.contributor.authorShim, Do
dc.contributor.authorChoi, Jae
dc.date.accessioned2017-05-09T01:11:56Z
dc.date.available2017-05-09T01:11:56Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_03_031201.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156131
dc.description.abstractThe plastic limit load solutions for cylinder and plate with slanted throughwall cracks (TWCs) are developed based on the systematic threedimensional (3D) finite element (FE) limit analyses. As for loading conditions, axial tension, global bending, and internal pressure are considered for a cylinder with slanted circumferential TWC, whereas, axial tension and internal pressure are considered for a plate and a cylinder with slanted axial TWC. Then, the verification of FE model and analysis procedure employed in the present numerical work was confirmed by employing the existing solutions for both cylinder and plate with idealized TWC. Also, the geometric variables of slanted TWC which can affect plastic limit loads were considered. Based on the systematic FE limit analysis results, the slant correction factors which represent the effect of slanted TWC on plastic limit load were provided as tabulated solutions. By adopting these slant correction factors, the plastic limit loads of slanted TWC can be directly estimated from existing solutions for idealized TWC. Furthermore, the modified engineering estimations of plastic limit loads for slanted TWC are proposed based on equilibrium equation and von Mises yield criterion. The present results can be applied either to diverse structural integrity assessments or for accurate estimation of fracture mechanics parameters such as Jintegral, plastic crack opening displacement (COD) and C*integral for slanted TWC based on the reference stress concept (Kim, et al., 2002, “Plastic Limit Pressure for Cracked Pipes Using Finite Element Limit Analyse,â€‌ Int. J. Pressure Vessels Piping, 79, pp. 321–330; Kim, et al., 2001, “Enhanced Reference StressBased J and Crack Opening Displacement Estimation Method for LeakBeforeBreak Analysis and Comparison With GE/EPRI Method,â€‌ Fatigue Fract. Eng. Mater. Struct., 24, pp. 243–254; Kim, et al., 2002, “NonLinear Fracture Mechanics Analyses of Part Circumferential Surface Cracked Pipes,â€‌ Int. J. Fract., 116, pp. 347–375.)
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Limit Loads for Slanted Through Wall Cracks in Cylinder and Plate Based on Finite Element Limit Analyses
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026109
dc.journal.fristpage31201
dc.journal.lastpage31201
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record