Show simple item record

dc.contributor.authorLuo, Liang
dc.contributor.authorHe, Xiaofeng
dc.contributor.authorDen, Ben
dc.contributor.authorHuang, Xing
dc.date.accessioned2017-05-09T01:11:56Z
dc.date.available2017-05-09T01:11:56Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_02_021601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156125
dc.description.abstractIn order to control the high PV value between the vanes and the cam ring in a water hydraulic vane pump, a pressurereducing valve with a constant pressure ratio was developed in this study. The pressure and leakage characteristics of the valve were theoretically analyzed by simulation and the experiments were also conducted based on the valve prototype. The theoretical analysis agrees well with the experimental results. Further, these results reveal that the pressure ratio of the valve decreases to the design value with the increasing working pressure. Additionally, the leakage of the valve rises simultaneously with the increasing working pressure and can be reduced significantly by decreasing the clearance between the valve body and the spool. The presented research not only proves the successful development of the pressurereducing valve but also lays a foundation for the investigation of a highpressure water hydraulic vane pump.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTheoretical and Experimental Research on a Pressure Reducing Valve for a Water Hydraulic Vane Pump
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4025686
dc.journal.fristpage21601
dc.journal.lastpage21601
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record