Show simple item record

dc.contributor.authorVarelis, George E.
dc.contributor.authorKaramanos, Spyros A.
dc.date.accessioned2017-05-09T01:11:54Z
dc.date.available2017-05-09T01:11:54Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_02_021207.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156117
dc.description.abstractThe present paper examines the structural behavior of elongated steel hollow cylinders, referred to as tubes or pipes, subjected to large cyclic bending, through a rigorous finite element simulation. The bent cylinders exhibit crosssectional distortion, in the form of ovalization, combined with excessive plastic deformations. Those deformations grow under repeated loading and may lead to structural instability in the form of local buckling (wrinkling) and, eventually, failure of the loaded member. The study focuses on relatively thickwalled seamless cylindrical members made of highstrength steel, which exhibit local buckling in the plastic range of the steel material. The analysis is conducted using advanced nonlinear finite element models capable of describing both geometrical and material nonlinearities. A cyclic plasticity model that adopts the “bounding surfaceâ€‌ concept is employed. The material model is calibrated through specialpurpose material testing, and implemented within ABAQUS, using a usersubroutine. The finite element model is validated by comparison with two experiments on highstrength steel tubular members. Special emphasis is given on the increase of ovalization and the gradual development of smallamplitude initial wrinkles with repeated loading cycles. A parametric numerical study is conducted, aimed at determining the effects of initial wrinkles on plastic buckling performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBuckling of High Strength Steel Cylinders Under Cyclic Bending in the Inelastic Range1
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4026123
dc.journal.fristpage21207
dc.journal.lastpage21207
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record