Show simple item record

dc.contributor.authorKannusamy, Ragupathy
dc.contributor.authorRamesh, K.
dc.date.accessioned2017-05-09T01:11:53Z
dc.date.available2017-05-09T01:11:53Z
dc.date.issued2014
dc.identifier.issn0094-9930
dc.identifier.otherpvt_136_02_021204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/156114
dc.description.abstractAircraft and pressure vessel components experience stresses that are negative biaxial or multiaxial in nature. Biaxiality is defined as the ratio of stress applied parallel and normal to the crack front. In recent years, many experimental studies have been conducted on fatigue crack growth (FCG) under various biaxial loading conditions. Biaxial loadings affect crack front stresses and strains, fatigue crack growth rate and direction, and crack tip plastic zone size and shape. Many of these studies have focused on positive biaxial loading cases. No conclusive study has been reported out yet that accurately quantifies the influence of negative biaxiality on fatigue crack growth behavior. Lacking validation, implementation on real life problems remains questionable. To ensure safe and optimum designs, it is necessary to better understand and quantify the effect of negative biaxial loading on fatigue crack behavior. This paper presents the results of a study to quantify the effect of biaxial load cases ranging from B = −0.5 to 1.0 on fatigue crack growth behavior. Also, a simplified approach is presented to incorporate the effect of biaxiality into da/dN curves generated from uniaxial loading using an analytical approach without conducting expensive biaxial crack growth testing. Sensitivity studies were performed with existing test data available for AA2014T6 aluminum alloy. Detailed elasticplastic finite element analyses were performed using the different stress ranges and stress ratios with various crack sizes and shapes on notched and unnotched geometries. Constant amplitude loads were applied for the current work and comparison studies were made between uniaxial and different biaxial loading cases. It was observed from the study that negative biaxiality has a very pronounced effect on the crack growth rate and direction for AA2014T6 if the externally applied load equal to 30% of the yield strength as compared with 40% of externally applied load for steel alloy quoted in the literature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Prediction of Fatigue Crack Growth Behavior Under Biaxial Loadings
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4025611
dc.journal.fristpage21204
dc.journal.lastpage21204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record