Droplet Impingement and Vapor Layer Formation on Hot Hydrophobic Surfaces
View/ Open
Date
2014Author
Yong Park, Ji
Gardner, Andrew
King, William P.
Cahill, David G.
Metadata
Show full item recordAbstract
We use pump–probe thermal transport measurements and high speed imaging to study the residence time and heat transfer of small (360 خ¼m diameter) water droplets that bounce from hydrophobic surfaces whose temperature exceeds the boiling point. The structure of the hydrophobic surface is a 10 nm thick fluorocarbon coating on a Si substrate; the Si substrate is also patterned with micronscale ridges using photolithography to further increase the contact angle. The residence time determined by highspeed imaging is constant at ≈1 ms over the temperature range of our study, 110 < T < 210 آ°C. Measurements of the thermal conductance of the interface show that the time of intimate contact between liquid water and the hydrophobic surface is reduced by the rapid formation of a vapor layer and reaches a minimum value of ≈0.025 ms at T > 190 آ°C. We tentatively associate this timescale with a ∼1 m s − 1 velocity of the liquid/vapor/solid contact line. The amount of heat transferred during the impact, normalized by the droplet volume, ranges from 0.028 J mm − 3 to 0.048 J mm − 3 in the temperature range 110 < T < 210 آ°C. This amount of heat transfer is ≈1–2% of the latent heat of evaporation.