Show simple item record

dc.contributor.authorEl
dc.contributor.authorSuszko, Arthur
dc.date.accessioned2017-05-09T01:09:35Z
dc.date.available2017-05-09T01:09:35Z
dc.date.issued2014
dc.identifier.issn0022-1481
dc.identifier.otherht_136_08_081503.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/155338
dc.description.abstractSaturation pool boiling experiments of degassed PF5060 dielectric liquid investigated nucleate boiling on 13 Cu surfaces with average roughness, Ra, of 0.039 (smooth polished) to 1.79 خ¼m at six inclination angles, خ¸, from 0 deg (upward facing) to 180 deg (downward facing). Values of the nucleate boiling heat transfer coefficient, hNB, in the upward facing orientation increase with increasing surface roughness and are correlated in terms of the applied heat flux, q: hNB = A qB. The exponent “Bâ€‌ decreases from 0.81 to 0.69 as Ra increases from 0.039 to 1.79 خ¼m, while the coefficient “Aâ€‌ increases with Ra to the power 0.24. The values of the maximum heat transfer coefficient, hMNB, which occurs near the end of the fully developed nucleate boiling region, increase with increasing Ra and decreasing inclination angle. In the upward facing orientation, hNB increases by ∼58% with increasing Ra from 0.134 to 1.79 خ¼m, while hMNB increases by more than 150% compared with that on smoothpolished Cu. Values of hMNB in the downward facing orientation are ∼40% of those in the upward facing orientation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSaturation Nucleate Boiling and Correlations for PF 5060 Dielectric Liquid on Inclined Rough Copper Surfaces
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4027365
dc.journal.fristpage81503
dc.journal.lastpage81503
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record