Show simple item record

dc.contributor.authorKearney, Daniel
dc.contributor.authorGriffin, Justin
dc.date.accessioned2017-05-09T01:09:34Z
dc.date.available2017-05-09T01:09:34Z
dc.date.issued2014
dc.identifier.issn0022-1481
dc.identifier.otherht_136_08_081401.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/155335
dc.description.abstractIncreasing trends toward integrated power electronic systems demand advancements in novel, efficient thermal management solutions to cope with the increasing the power density. This paper investigates the performance of a novel open loop pulsating heat pipe embedded in an FR4 organic substrate. The heat pipe is comprised of 26 parallel minichannels, 13 turns with an average hydraulic diameter of 1.7 mm and maximum surface roughness of 2.5 خ¼m. The bulk thermal performance of three saturated working fluids—Novec 649, Novec 7200 and Ethanol (99.8%)—is investigated in terms of fill ratio, three angles of orientation, and applied heat fluxes ranging from 0.4 to 2.5 W/cm2 at subambient pressures. Novec 649 achieved quasistable pulsations at lower heat fluxes compared to Novec 7200 and Ethanol (99.8%). In addition, the dielectric Novec 649 fluid showed significant potential for integrated heat spreading applications demonstrating heat transfer of up to 176 W and thermal resistances as low as 0.25 آ°C/W for a filling ratio of 30%—16 times greater than that of a standard dry FR4 substrate
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Open Loop Pulsating Heat Pipe for Integrated Electronic Cooling Applications
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4027131
dc.journal.fristpage81401
dc.journal.lastpage81401
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record