Show simple item record

dc.contributor.authorTerzis, Alexandros
dc.contributor.authorWagner, Guillaume
dc.contributor.authorvon Wolfersdorf, Jens
dc.contributor.authorOtt, Peter
dc.contributor.authorWeigand, Bernhard
dc.date.accessioned2017-05-09T01:09:29Z
dc.date.available2017-05-09T01:09:29Z
dc.date.issued2014
dc.identifier.issn0022-1481
dc.identifier.otherht_136_07_071701.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/155296
dc.description.abstractThis study examines experimentally the cooling performance of narrow impingement channels as could be castin in modern turbine airfoils. Full surface heat transfer coefficients are evaluated for the target plate and the sidewalls of the channels using the transient liquid crystal technique. Several narrow impingement channel geometries, consisting of a single row of five cooling holes, have been investigated composing a test matrix of nine different models. The experimental data are analyzed by means of various postprocessing procedures aiming to clarify and quantify the effect of cooling hole offset position from the channel centerline on the local and average heat transfer coefficients and over a range of Reynolds numbers (11,100–86,000). The results indicated a noticeable effect of the jet pattern on the distribution of convection coefficients as well as similarities with conventional multijet impingement cooling systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHole Staggering Effect on the Cooling Performance of Narrow Impingement Channels Using the Transient Liquid Crystal Technique
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4027250
dc.journal.fristpage71701
dc.journal.lastpage71701
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record