Show simple item record

dc.contributor.authorAgrira, Abdalla
dc.contributor.authorButtsworth, David R.
dc.contributor.authorSaid, Mior A.
dc.date.accessioned2017-05-09T01:09:17Z
dc.date.available2017-05-09T01:09:17Z
dc.date.issued2014
dc.identifier.issn0022-1481
dc.identifier.otherht_136_03_031703.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/155214
dc.description.abstractDue to the inherently unsteady environment of reciprocating engines, unsteady thermal boundary layer modeling may improve the reliability of simulations of internal combustion engine heat transfer. Simulation of the unsteady thermal boundary layer was achieved in the present work based on an effective variable thermal conductivity from different turbulent Prandtl number and turbulent viscosity models. Experiments were also performed on a motored, singlecylinder sparkignition engine. The unsteady energy equation approach furnishes a significant improvement in the simulation of the heat flux data relative to results from a representative instantaneous heat transfer correlation. The heat flux simulated using the unsteady model with one particular turbulent Prandtl number model agreed with measured heat flux in the wide open and fully closed throttle cases, with an error in peak values of about 6% and 35%, respectively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInstantaneous Heat Flux Simulation of a Motored Reciprocating Engine: Unsteady Thermal Boundary Layer With Variable Turbulent Thermal Conductivity
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4025639
dc.journal.fristpage31703
dc.journal.lastpage31703
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record