Dynamic Modeling of a Reformed Methanol Fuel Cell System Using Empirical Data and Adaptive Neuro Fuzzy Inference System Models

Abstract

In this work, a dynamic matlab Simulink model of an H3350 reformed methanol fuel cell (RMFC) standalone battery charger produced by Serenergyآ® is developed on the basis of theoretical and empirical methods. The advantage of RMFC systems is that they use liquid methanol as a fuel instead of gaseous hydrogen, which is difficult and energyconsuming to store and transport. The models include thermal equilibrium models of the individual components of the system. Models of the heating and cooling of the gas flows between components are also modeled and adaptive neurofuzzy inference system models of the reforming process are implemented. Models of the cooling flow of the blowers for the fuel cell and the burner which supplies process heat for the reformer are made. The two blowers have a common exhaust, which means that the two blowers influence each other's output. The models take this into account using an empirical approach. Fin efficiency models for the cooling effect of the air are also developed using empirical methods. A fuel cell model is also implemented based on a standard model, which is adapted to fit the measured performance of the H3350 module. All of the individual parts of the model are verified and finetuned through a series of experiments and are found to have mean absolute errors between 0.4% and 6.4% but typically below 3%. After a comparison between the performance of the combined model and the experimental setup, the model is deemed to be valid for control design and optimization purposes.