Show simple item record

dc.contributor.authorTajeddini, Vahid
dc.contributor.authorBen Atitallah, Hassene
dc.contributor.authorMuliana, Anastasia
dc.contributor.authorOunaies, Zoubeida
dc.date.accessioned2017-05-09T01:08:16Z
dc.date.available2017-05-09T01:08:16Z
dc.date.issued2014
dc.identifier.issn0094-4289
dc.identifier.othermats_136_02_021005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154895
dc.description.abstractIn the present study, viscoelastic response of an active fiber composite (AFC) is investigated by conducting stress relaxation and creep deformation tests, and the quasilinear viscoelastic (QLV) constitutive model is used to describe the viscoelastic response of the AFC. The AFC under study consists of unidirectional long piezoelectric ceramic fibers embedded in an epoxy polymer, encapsulated between two Kapton layers with interdigitated surface electrodes. The relaxation and creep experiments are performed by loading the AFC samples along the longitudinal axis of the fibers, under several strain and stress levels at three temperatures, namely 25 آ°C, 50 آ°C, and 75 آ°C. The experimental results reveal the nonlinear viscoelastic behavior of the composite. Next, simulation and prediction of the viscoelastic response, including stress relaxation and creep deformation of the material, are done by using semianalytical QLV model in which a relaxation timedependent function is used, which also depends on strain and temperature. The results from the model are compared with those from the experiments. In general, the experimental and simulation results are in good agreement, except in the case of some of the creep responses, where considerable discrepancies are seen between the experimental and analytical approaches. Possible reasons for these differences are discussed in details.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Viscoelastic Behavior of Active Fiber Composites
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.4026474
dc.journal.fristpage21005
dc.journal.lastpage21005
dc.identifier.eissn1528-8889
dc.treeJournal of Engineering Materials and Technology:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record