Show simple item record

dc.contributor.authorAgbasimalo, Nnamdi
dc.contributor.authorRadonjic, Mileva
dc.date.accessioned2017-05-09T01:07:14Z
dc.date.available2017-05-09T01:07:14Z
dc.date.issued2014
dc.identifier.issn0195-0738
dc.identifier.otherjert_136_04_042908.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154596
dc.description.abstractFlood experiments were conducted over 30day periods at 14.48 MPa (2100 psi) confining pressure and temperature of 22 آ°C (72 آ°F) with cement–sandstone composite cores and brine at a flow rate of 1 ml/min. Higher pH values were observed in the effluent brine from the 10% mud contaminated core than the 0% mud contaminated core due to increased dissolution of cement. Microtomography revealed higher porosity at the interface zone of the 10% mud contaminated core. These show that mud contamination has a deleterious effect on the cement–sandstone interface and may create pathways for interzonal communication as well as sustained casing pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study of the Impact of Drilling Fluid Contamination on the Integrity of Cement–Formation Interface
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4027566
dc.journal.fristpage42908
dc.journal.lastpage42908
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2014:;volume( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record