Show simple item record

dc.contributor.authorZhang, Quan
dc.contributor.authorWang, Zhiming
dc.contributor.authorWang, Xiaoqiu
dc.contributor.authorYang, Jiankang
dc.date.accessioned2017-05-09T01:07:13Z
dc.date.available2017-05-09T01:07:13Z
dc.date.issued2014
dc.identifier.issn0195-0738
dc.identifier.otherjert_136_04_042903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154591
dc.description.abstractOver the past two decades, the modeling of flow in a perforated pipe with influx through wall openings has been recognized as a key topic especially in the field of horizontal wells. In this paper, based on the theoretical analysis and previous research achievements, combining with the new measured data sets stemming from the largescale experimental apparatus designed and constructed recently at China University of Petroleum (CUP), a new comprehensive model has been developed for the prediction of pressure drop regarding singlephase flow in horizontal perforated pipes with wall influx, in which new correlations for calculating the hydraulic friction factor and momentum correction factor of variable mass flow are given. The presented model is then implemented using the visual basic.net package and validated against two data sets obtained on singlephase water flow and singlephase oil flow. Predictions of the new model and frequently used Ouyang model are also compared based on the new experimental data. Results show that the model given in this article can not only properly represent the complex mechanisms of flow in the horizontal wellbore, such as the resistance caused by wall perforations and the drag reduction or socalled lubrication effect caused by wall injection, but also has a preferable prediction accuracy. Compared with the water flow data and the oil flow data, the absolute average percentage errors of the proposed model are, respectively, 4.5% and 5.0%, which demonstrates better performance and wider application range than Ouyang model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA New Comprehensive Model for Predicting the Pressure Drop of Flow in the Horizontal Wellbore
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4027572
dc.journal.fristpage42903
dc.journal.lastpage42903
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2014:;volume( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record