Show simple item record

dc.contributor.authorKumar, Aniket
dc.contributor.authorSamuel, Robello
dc.date.accessioned2017-05-09T01:07:12Z
dc.date.available2017-05-09T01:07:12Z
dc.date.issued2014
dc.identifier.issn0195-0738
dc.identifier.otherjert_136_03_033101.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154581
dc.description.abstractThe “Smear Effectâ€‌ observed during a casingwhiledrilling operation helps reduce lost circulation, provides wellbore strengthening, and improves the fracture gradient so we can drill more effectively through depleted reservoirs. Several case studies have been reported confirming the formation of a smear zone around the wellbore wall, due to the plastering of cuttings and added lost circulation materials. However, even after successful application in a number of cases, a thorough understanding of the parameters affecting the formation of the smear zone and the subsequent increase in the fracture gradient is not available. This study analyses the theory behind the phenomenon of the smear effect mechanism using case studies and existing literature, and then applies analytical models to estimate the improvement in the fracture gradient based on the drilling parameters and reservoir properties. The formation of the smear zone has been investigated by modeling the mechanism of initiation of microfractures around the wellbore wall due to high equivalent circulating densities (ECDs) occurring during casing while drilling. The effect of plugging of these generated microfractures by the drilled cuttings and additional lost circulation material added has then been modelled, to estimate the resultant improvement in fracture gradients expected along the wellbore open hole section. In addition, the appropriate particle size distribution required to successfully plug the microfractures has also been presented. These analytical models have then been applied to a simulated field case study and the results have been analysed in the context of recorded field observations to simulate the smear effect using the proposed models. The contribution of the casing size and length, formation properties, and operating parameters on the initiation of microfractures and the increase in fracture gradient has also been presented to better demonstrate the mechanism of the formation of the smear zone. This analysis is one of the first of its kind of theoretical study to understand the fundamentals of the smear effect mechanism and can be suitably applied to enhance our understanding of the smear effect to use it better to our advantage.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Model to Characterize “Smear Effectâ€‌ Observed While Drilling With Casing1
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4027156
dc.journal.fristpage33101
dc.journal.lastpage33101
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record