Show simple item record

dc.contributor.authorKesana, N. R.
dc.contributor.authorVieira, R.
dc.contributor.authorMcLaury, B. S.
dc.contributor.authorShirazi, S. A.
dc.date.accessioned2017-05-09T01:07:11Z
dc.date.available2017-05-09T01:07:11Z
dc.date.issued2014
dc.identifier.issn0195-0738
dc.identifier.otherjert_136_03_033001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154580
dc.description.abstractSand production is one of the major concerns for oil and gas producers. If production fluid velocities are not controlled properly, the produced sand may erode the pipelines which may result in pipe failures and halt the production causing economical losses as well as environmental issues. In order to better understand the erosion mechanism and improve current erosion models, it would be beneficial to identify the distribution of sand flowing inside the pipe. Therefore, sand sampling was performed at five different locations inside a 0.0732 m (3 in.) diameter horizontal pipe at L/D ∼ 150 using a pitotstyle tube 6.35 mm (0.25 in.) in diameter. The probe was moved transversely from the top of the pipe and the face of the probe is facing the fluid flow to achieve sampling close to isokinetic conditions. Additionally, sampling experiments were conducted using the fixed mounted ports at the pipe wall. Using the fixed mounted ports, sampling is conducted both in a straight pipe section and elbow section. Experiments were performed in two different multiphase flow patterns (slug and wavyannular) using two different particle sizes (150 خ¼m and 300 خ¼m) and three different liquid viscosities (1 cP, 10 cP, 40 cP). The influence of particle diameter, liquid viscosity, and the flow pattern on the sand distribution profiles will be discussed. From the experimental data, the recommended approaches for flowing concentration measurements are discussed. Finally, the implications of the sand concentration measurements on erosion are mentioned.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study of Sand Particle Concentration Profiles in Straight and Pipe Elbow for Horizontal Multiphase Flows
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4026603
dc.journal.fristpage33001
dc.journal.lastpage33001
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record