• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Sensitivity Analysis and Experimental Research on Ball Bearing Early Fault Diagnosis Based on Testing Signal From Casing

    Thumbnail
    View/Open
    ds_136_06_061009.pdf (3.372Mb)
    Date
    2014
    Author
    Chen, G.
    Hao, T. F.
    Wang, H. F.
    Zhao, B.
    Wang, J.
    Cheng, X. Y.
    Metadata
    Show full item record
    Abstract
    The ball bearings of an aeroengine are key parts that frequently fail, and it is very important to effectively carry out fault diagnosis of the ball bearings. However, in the present research work, the ball bearing faults characteristics are extracted mainly from the bearing house signals, it is well known that usually only the casing signals can be measured in practical aeroengine test, and the ball bearing faults characteristics will greatly weaken after transmitting to the casing from the bearing house, therefore, it is very important to extract the fault characteristics of ball bearings from casing vibration signals for the ball bearing fault diagnosis in the practical aeroengine. In this study, simulation experiments for ball bearing faults are conducted using two rotor experimental rigs with casings. In addition, by means of the impulse response method, the transfer characteristics from the ball bearings to casing measuring points are measured, and a sensitivity analysis is performed. Faults are created on the inner ring, outer ring, and ball of the ball bearings in the two experimental rigs. The ball bearing experiments are carried out, and the fault features are extracted by means of a wavelet envelope analysis. The experimental results indicate that, with high connection stiffness between the bearing house and the casing, there is little vibration attenuation. However, with low connection stiffness, the vibration attenuation is great. After the impulse vibrations caused by the ball bearing faults are transmitted to the casing, the casing vibration is very weak and is often submerged in other signals. However, the ball bearing fault characteristic frequencies can still be effectively extracted from the weak casing vibration signals by using a wavelet envelope analysis. The research results in this study provide an experimental basis for a ball bearing fault diagnosis based on a casing test signal from a practical aeroengine.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/154431
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV