Show simple item record

dc.contributor.authorChirico, III ,Anthony J.
dc.contributor.authorKolodziej, Jason R.
dc.date.accessioned2017-05-09T01:06:33Z
dc.date.available2017-05-09T01:06:33Z
dc.date.issued2014
dc.identifier.issn0022-0434
dc.identifier.otherds_136_04_041025.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154374
dc.description.abstractThis research investigates a novel datadriven approach to condition monitoring of electromechanical actuators (EMAs) consisting of feature extraction and fault classification. The approach is able to accommodate timevarying loads and speeds since EMAs typically operate under nonsteady conditions. The feature extraction process exposes fault frequencies in signal data that are synchronous with motor position through a series of signal processing techniques. A resulting reduced dimension feature is then used to determine the condition with a trained Bayesian classifier. The approach is based on signal analysis in the frequency domain of inherent EMA signals and accelerometers. For this work, two common failure modes, bearing and ball screw faults, are seeded on a MOOG MaxForce EMA. The EMA is then loaded using active and passive load cells with measurements collected via a dSPACE data acquisition and control system. Typical position commands and loads are utilized to simulate “realworldâ€‌ inputs and disturbances and laboratory results show that actuator condition can be determined over a range of inputs. Although the process is developed for EMAs, it can be used generically on other rotating machine applications as a Health and Usage Management System (HUMS) tool.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Data Driven Methodology for Fault Detection in Electromechanical Actuators
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4026835
dc.journal.fristpage41025
dc.journal.lastpage41025
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record