Show simple item record

dc.contributor.authorZhao, Junfeng
dc.contributor.authorWang, Junmin
dc.date.accessioned2017-05-09T01:06:22Z
dc.date.available2017-05-09T01:06:22Z
dc.date.issued2014
dc.identifier.issn0022-0434
dc.identifier.otherds_136_03_031010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154324
dc.description.abstractThis paper investigates the impact of fuel property variations on the common rail pressure fluctuation in highpressure common rail (HPCR) system and explores the possibility of identifying the fuel types based on the measurement of rail pressure for internal combustion engines. Fluid transients, particularly the water hammer effect in a HPCR system, are discussed and the 1D governing equations are given. A typical HPCR system model is developed in GTSuite with the injectors, threeplunger highpressure pump, and pressure control valve being modeled in a relatively high level of detail. Four different fuels including gasoline, ethanol, diesel, and biodiesel are modeled and their properties including density, bulk modulus, and acoustic wave speed are validated against data in the literature. Simulation results are obtained under different conditions with variable rail pressures and engine speeds. To reduce the excessive rail pressure oscillation caused by multiple injections, only four maininjections are enabled in each engine revolution. The results show that the natural frequency of a common rail varies with the type of fuel filled in it. By applying the fast Fourier transform (FFT) to the pressure signal, the differences of fuel properties can be revealed in the frequency domain. The experiment validation is conducted on a mediumduty diesel engine, which is equipped with a typical HPCR system and piezoelectric injectors. Tests results are given for both pure No. 2 diesel and pure soybean biodiesel at different rail pressure levels and different engine speeds. This approach is proved to be potentially useful for fuel property identification of gasolineethanol or dieselbiodiesel blends on internal combustion engines.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn Board Fuel Property Identification Method Based on High Pressure Common Rail Pressure Signal
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4026130
dc.journal.fristpage31010
dc.journal.lastpage31010
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record