Show simple item record

dc.contributor.authorMoberg, Stig
dc.contributor.authorWernholt, Erik
dc.contributor.authorHanssen, Sven
dc.contributor.authorBrogأ¥rdh, Torgny
dc.date.accessioned2017-05-09T01:06:21Z
dc.date.available2017-05-09T01:06:21Z
dc.date.issued2014
dc.identifier.issn0022-0434
dc.identifier.otherds_136_03_031005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154318
dc.description.abstractThis paper considers the problem of dynamic modeling and identification of robot manipulators with respect to their elasticities. The socalled flexible joint model, modeling only the torsional gearbox elasticity, is shown to be insufficient for modeling a modern industrial manipulator accurately. Another lumped parameter model, called the extended flexible joint model, is therefore used to improve the model accuracy. In this model, nonactuated joints are added to model the elasticity of the links and bearings. The unknown elasticity parameters are estimated using a frequencydomain graybox identification method. The conclusion is that the obtained model describes the movements of the motors and the tool mounted on the robot with significantly higher accuracy than the flexible joint model. Similar elasticity model parameters are obtained when using two different output variables for the identification, the motor position and the tool acceleration.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling and Parameter Estimation of Robot Manipulators Using Extended Flexible Joint Models
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4026300
dc.journal.fristpage31005
dc.journal.lastpage31005
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record