Show simple item record

dc.contributor.authorOlsen, Scott G.
dc.contributor.authorBone, Gary M.
dc.date.accessioned2017-05-09T01:06:20Z
dc.date.available2017-05-09T01:06:20Z
dc.date.issued2014
dc.identifier.issn0022-0434
dc.identifier.otherds_136_02_024502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154309
dc.description.abstractThis brief paper investigates the control of a robotic bulldozing operation. Optimal blade position control laws were designed based on a hybrid dynamic model to maximize the predicted material removal rate of the bulldozing process. Experiments were conducted with a scaleddown robotic bulldozing system. The control laws were implemented with various tuning values. As a comparison, a rulebased blade control algorithm was also designed and implemented. The experimental results with the best optimal controller demonstrated a 33% increase in the average material removal rate compared to the rulebased controller.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Based Control of Three Degrees of Freedom Robotic Bulldozing
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4025861
dc.journal.fristpage24502
dc.journal.lastpage24502
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record