Show simple item record

dc.contributor.authorMiller, Jonathan I.
dc.contributor.authorFlack, Tim J.
dc.contributor.authorCebon, David
dc.date.accessioned2017-05-09T01:06:20Z
dc.date.available2017-05-09T01:06:20Z
dc.date.issued2014
dc.identifier.issn0022-0434
dc.identifier.otherds_136_02_021022.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/154306
dc.description.abstractA novel pneumatic valve was constructed to improve the response of airactuated brakes for heavy vehicles to demand pressures generated during electronically controlled braking by an order of magnitude. Investigations were made into the interactions between the magnetic, mechanical, and electrical subsystems of the valve with a view toward informing design optimization. The valve was modeled using a magnetic circuit approach. The quasistatic model included the influences of the permanent magnet, fieldline fringing, saturation, and the coil. Mechanical forces outputted by the model matched physical measurements with an error smaller than 10%, and magnetic fluxes throughout the circuit were generally within 20% of those found from experiments based on Faraday's law of induction, Gaussmeter measurements, and FEA simulations. A magnetomechanical simulation of the valve switching states was created using mechanical and electrical equations, and curvefits to the outputs of the magnetic circuit model. The simulation produced time histories of the valve's armature position that matched experimental measurements and adequately predicted working pressures. The final model required an approximation to the influence of the coil based on experimental results. Consequently, further research is recommended into the influence of solenoid coils on fringing in magnetic circuits.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling the Magnetic Performance of a Fast Pneumatic Brake Actuator
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4025813
dc.journal.fristpage21022
dc.journal.lastpage21022
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record