Show simple item record

dc.contributor.authorTakahashi, Yukio
dc.contributor.authorDogan, Bilal
dc.contributor.authorGandy, David
dc.date.accessioned2017-05-09T01:02:28Z
dc.date.available2017-05-09T01:02:28Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_06_061204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153102
dc.description.abstractFailure under creepfatigue interaction is receiving an increasing interest due to an increased number of startup and shutdowns in fossil power generation plants as well as development of newer nuclear power plants employing lowpressure coolant. Such situations have prompted the studies on creepfatigue interaction and the developments of various approaches for evaluating its significance in design as well as remaining life evaluation, but most of them are fragmental and rather limited in terms of materials and test conditions covered. Therefore, applicability of the proposed approaches to different materials or even different temperatures is uncertain in many cases. The present work was conducted in order to comparably evaluate the representative approaches used in the prediction of failure life under creepfatigue conditions as well as their modifications, by systematically applying them to available test data on a wide range of materials which have been used or are planned to be used in various types of power generation plants. The following observations have been made from this exercise: (i) The time fraction model has a tendency to be nonconservative in general, especially at low temperature and small strain ranges. Because of the large scatter of the total damage, this shortcoming would be difficult to cover by the consideration of creepfatigue interaction in a simple manner. (ii) The classical ductility exhaustion model showed a general tendency to be overly conservative in many situations, especially at small strain ranges. (iii) The modified ductility exhaustion model based on the redefinition of creep damage showed improved predictability with a slightly nonconservative tendency. (iv) Energybased ductility exhaustion model developed in this study seems to show the best predictability among the four procedures in an overall sense although some dependency on strain range and materials was observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSystematic Evaluation of Creep Fatigue Life Prediction Methods for Various Alloys
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024436
dc.journal.fristpage61204
dc.journal.lastpage61204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record