Show simple item record

dc.contributor.authorEL
dc.contributor.authorYounan, Maher Y. A.
dc.contributor.authorSallam, Hossam E. M.
dc.contributor.authorAbdel
dc.date.accessioned2017-05-09T01:02:28Z
dc.date.available2017-05-09T01:02:28Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_06_061203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153101
dc.description.abstractThe main purpose of the present paper is to investigate the effect of crack depth on the plastic load (collapse load) of miter pipe bends (MPB) under inplane bending moment. The experimental work is conducted to investigate multimiter pipe bends, with a bend angle 90 deg, pipe bend factor h = 0.844, standard dimension ratio (SDR) = 11, and number of welding junctions m = 3 under a crosshead speed 500 mm/min. The material of the investigated pipe is a highdensity polyethylene (HDPE), which is used in natural gas (NG) piping systems. The welds in the miter pipe bends are produced by buttfusion method. The crack depth varies from intrados to extrados location according to the inplane opening/closing bending moment, respectively. For each inplane bending moment, the plastic load is obtained by the tangent intersection (TI) method from the load–deflection curves produced by the testing machine specially designed and constructed in the laboratory.5 The study reveals that increasing the crack depth leads to a decrease in the stiffness and plastic load of MPB for both inplane closing and opening bending moment. Higher values of the plastic load are reached in case of opening bending moment. This behavior is true for all investigated crack depths. A circumferential external crack has an obvious effect on the behavior of load–deflection curve. The linear elastic region in both mode of loading decreases with increasing crack depth.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Load of Precracked Polyethylene Miter Pipe Bends Subjected to In Plane Bending Moment1
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024658
dc.journal.fristpage61203
dc.journal.lastpage61203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record