Show simple item record

dc.contributor.authorXu, Xinsheng
dc.contributor.authorSun, Jiabin
dc.contributor.authorLim, C. W.
dc.date.accessioned2017-05-09T01:02:24Z
dc.date.available2017-05-09T01:02:24Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_05_051204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153081
dc.description.abstractThis study is mainly concerned with the analytical solutions of plastic bifurcation buckling of cylindrical shells under compressive load. The analysis is based on the J2 deformation theory with a linear hardening and proportional loading is adopted in the calculation. A symplectic solution system is established and Hamilton's governing equations are derived from the Hamilton variational principle. The basic problem in plastic buckling is converted into solving for the symplectic eigenvalues and eigensolutions, respectively. The obtained results reveal that boundary conditions have a very limited influence on bucking loads but its influence on buckling modes and plastic borders cannot be neglected. Meanwhile, it is demonstrated that the shell material properties significantly affect the plastic buckling behavior. This proposed symplectic method is shown to be a rigorous approach. It also provides a uniform and systematic way to any other similar problems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analytical Symplecticity Method for Axial Compression Plastic Buckling of Cylindrical Shells
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024687
dc.journal.fristpage51204
dc.journal.lastpage51204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record