Show simple item record

dc.contributor.authorMahmood, S. L.
dc.contributor.authorSeshadri, R.
dc.date.accessioned2017-05-09T01:02:24Z
dc.date.available2017-05-09T01:02:24Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_05_051203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153080
dc.description.abstractIn this paper, the mخ±tangent multiplier is used in conjunction with the elastic modulus adjustment procedure (EMAP) for limit load determination. This technique is applied to a number of mechanical components possessing different kinematic redundancies. By specifying spatial variations in the elastic modulus, numerous sets of statically admissible and kinematically admissible stress and strain distributions are generated, and limit loads for practical components are then determined using the mخ±tangent method. The procedure ensures sufficiently accurate limit loads within a reasonable number of iterations. Results are compared with the inelastic finite element results and are found to be in satisfactory agreement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLimit Load Evaluation Using the mخ± Tangent Multiplier in Conjunction With Elastic Modulus Adjustment Procedure
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024452
dc.journal.fristpage51203
dc.journal.lastpage51203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record