Show simple item record

dc.contributor.authorJappy, Alan
dc.contributor.authorMackenzie, Donald
dc.contributor.authorChen, Haofeng
dc.date.accessioned2017-05-09T01:02:24Z
dc.date.available2017-05-09T01:02:24Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_05_051202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153079
dc.description.abstractEnsuring sufficient safety against ratchet is a fundamental requirement in pressure vessel design. Determining the ratchet boundary can prove difficult and computationally expensive when using a full elastic–plastic finite element analysis and a number of direct methods have been proposed that overcome the difficulties associated with ratchet boundary evaluation. Here, a new approach based on fully implicit finite element methods, similar to conventional elastic–plastic methods, is presented. The method utilizes a twostage procedure. The first stage determines the cyclic stress state, which can include a varying residual stress component, by repeatedly converging on the solution for the different loads by superposition of elastic stress solutions using a modified elastic–plastic solution. The second stage calculates the constant loads which can be added to the steady cycle while ensuring the equivalent stresses remain below a modified yield strength. During stage 2 the modified yield strength is updated throughout the analysis, thus satisfying Melan's lower bound ratchet theorem. This is achieved utilizing the same elastic plastic model as the first stage, and a modified radial return method. The proposed methods are shown to provide better agreement with upper bound ratchet methods than other lower bound ratchet methods, however limitations in these are identified and discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Fully Implicit, Lower Bound, Multi Axial Solution Strategy for Direct Ratchet Boundary Evaluation: Theoretical Development
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024449
dc.journal.fristpage51202
dc.journal.lastpage51202
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record