Show simple item record

dc.contributor.authorYadav, Ashwini K.
dc.contributor.authorKumar, Ravi
dc.contributor.authorGupta, Akhilesh
dc.contributor.authorChatterjee, B.
dc.contributor.authorMajumdar, P.
dc.contributor.authorMukhopadhyay, D.
dc.date.accessioned2017-05-09T01:02:22Z
dc.date.available2017-05-09T01:02:22Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153070
dc.description.abstractSome postulated events for pressurized heavy water reactor (PHWR) small break loss of coolant accident (SBLOCA) may lead to flow stratification in the reactor channels. Such stratified flow causes a circumferential temperature gradient in the fuel bundle as well as in the surrounding pressure tube (PT). The present investigation has been performed to study the thermomechanical behavior of a PT under an asymmetric heatup condition arising from flow stratification in a 19 pin fuel element simulator. A series of experiments has been carried out at various stratification levels and PT internal pressures. The asymmetrical heatup creates a temperature difference of 400 آ°C across the diameter of the PT. At high temperature the internal pressure causes ballooning of the PT. With the stratification, ballooning is found to get initiated at top hot side of PT and further propagates unevenly over its periphery. Axially ballooning is found to get initiated from center and then propagates toward both the ends of the PT. This results in an axial temperature gradient on the PT in addition of circumferential gradient. For a pressure higher than 4.0 MPa, the integrity of PT is found to be lost due to the combined effect of circumferential and axial temperature gradient generated under uneven strain distribution.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermomechanical Behavior of Pressure Tube Under Small Break Loss of Coolant Accident for PHWR
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024580
dc.journal.fristpage41601
dc.journal.lastpage41601
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record