Show simple item record

dc.contributor.authorYamaguchi, Yoshihito
dc.contributor.authorKatsuyama, Jinya
dc.contributor.authorOnizawa, Kunio
dc.contributor.authorLi, Yinsheng
dc.contributor.authorYagawa, Genki
dc.date.accessioned2017-05-09T01:02:22Z
dc.date.available2017-05-09T01:02:22Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041406.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153066
dc.description.abstractThe seismic design review guide in Japan was revised in September 2006 to address the occurrence of a large earthquake beyond the design basis. In addition, Japanese nuclear power plants (NPPs) experienced multiple large earthquakes, such as Niigataken ChuetsuOki Earthquake in 2007 and the Great East Japan Earthquake in 2011. Therefore, it is very important to assess the structural integrity of reactor piping under such a large earthquake when a crack exists in the piping. In this work, crack growth behavior after excessive loading during the largescale earthquake were experimentally and analytically evaluated for carbon steel and austenitic stainless steel. Some cyclic loading patterns with increasing and decreasing load amplitudes and maximum loads were applied to fatigue crack growth test specimens. From the results, the retardation of crack growth rate was clearly observed after excessive loading. In addition, the applicability to the retardation effect of the modified Wheeler model was confirmed. It is also concluded that the retardation effect has little influence on the failure probability due to seismic loading using probabilistic fracture mechanics (PFM) analyses with the modified Wheeler model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Analytical Studies on the Effect of Excessive Loading on Fatigue Crack Propagation in Piping Materials
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024454
dc.journal.fristpage41406
dc.journal.lastpage41406
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record