Show simple item record

dc.contributor.authorLi, Yinsheng
dc.contributor.authorHasegawa, Kunio
dc.contributor.authorMiura, Naoki
dc.contributor.authorHoshino, Katsuaki
dc.date.accessioned2017-05-09T01:02:22Z
dc.date.available2017-05-09T01:02:22Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041405.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153065
dc.description.abstractWhen a crack is detected in a stainless steel pipe during inservice inspections, the failure estimation method given in codes such as the ASME Boiler and Pressure Vessel Code Section XI or JSME Rules on FitnessforService for Nuclear Power Plants can be applied to evaluate the structural integrity of the cracked pipe. In the current codes, the failure estimation method includes the bending moment and tensile force due to pressure. The torsion moment is assumed to be relatively small and is not considered. Recently, analytical investigations considering multiaxial loads including torsion were conducted in several previous studies by examining the limit load for pipes with a circumferential crack. A failure estimation method for the combined bending moment, torsion moment, and internal pressure was proposed. In this study, the failure behavior of pipes with a circumferential crack subjected to multiaxial loads including the torsion is investigated to provide experimental support for the failure estimation method. Experiments were carried out on small size stainless steel cylinders containing a circumferential surface or throughwall crack, subjected to the combined tensile load and torsion moment. Based on the experimental results, the proposed failure estimation method was confirmed to be applicable to cracked pipes subjected to combined tensile and torsion loads.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Failure Estimation Method for Stainless Steel Pipes With a Circumferential Crack Subjected to Combined Tensile and Torsion Loads
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4023735
dc.journal.fristpage41405
dc.journal.lastpage41405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record