Show simple item record

dc.contributor.authorTakashima, Yasuhito
dc.contributor.authorOhata, Mitsuru
dc.contributor.authorTagawa, Tetsuya
dc.contributor.authorMinami, Fumiyoshi
dc.contributor.authorSimoens, Bart
dc.contributor.authorLefebvre, Michel H.
dc.contributor.authorNickell, Robert E.
dc.contributor.authorKoide, Kenji
dc.contributor.authorKitamura, Ryusuke
dc.contributor.authorHayashi, Koichi
dc.contributor.authorAsahina, Joseph K.
dc.date.accessioned2017-05-09T01:02:21Z
dc.date.available2017-05-09T01:02:21Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041404.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153064
dc.description.abstractThe plastic damage caused by multiple dynamic loading and its influence on the ductility and toughness of 3.5% Ni steel (SA203E) and C steel (SA516M) were examined for the discussion of integrity design of detonation chambers. Vnotched specimens and hourglass specimens were welded on the 1/7scale model of a 1ton explosive class detonation chamber and subjected to 30 detonation shots. It has been indicated that 30 detonation shots caused prestrain in the specimens. The ductility was reduced by the prestrain. The Charpy impact toughness was affected as well in a lower temperature. It has been noted that the damage is developed with fatigue crack growth at the notch root of the Vnotched specimen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDamage Caused by Dynamic/Cyclic Loading of a Detonation Chamber
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4023733
dc.journal.fristpage41404
dc.journal.lastpage41404
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record