Show simple item record

dc.contributor.authorXu, Shugen
dc.contributor.authorChen, Chao
dc.date.accessioned2017-05-09T01:02:21Z
dc.date.available2017-05-09T01:02:21Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_4_041204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153059
dc.description.abstractAn interlayer gap is inevitable in layered spherical shells. Therefore, the classic formulae for the monobloc spherical shell can no longer be used. In this paper, the formulae for the elastic stress calculation of layered spherical shells were proposed and the difference between the proposed formulae and ASME formulae was clarified. Interlayer gaps induce stress redistribution and stress discontinuity in the layered spherical shell. The hoop stress in the inner wall surface becomes higher than that in the monobloc spherical shell, and the stress in the outer wall surface is lower. Calculation results obtained from the proposed formulae were compared to those obtained by the finite element method (FEM) and ASME formulae. It was shown that the results from the proposed formulae are in accordance with finite element results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic Stress Distribution in Layered Spherical Shells With Gaps Caused by Internal Pressure
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024443
dc.journal.fristpage41204
dc.journal.lastpage41204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record