Show simple item record

dc.contributor.authorBitter, Neal P.
dc.contributor.authorShepherd, Joseph E.
dc.date.accessioned2017-05-09T01:02:18Z
dc.date.available2017-05-09T01:02:18Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_3_031203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153047
dc.description.abstractDetonations and deflagrationtodetonation transition (DDT) are experimentally studied in horizontal pipes which are partially filled with water. The gas layer above the water is stoichiometric hydrogen–oxygen at 1 bar. The detonation wave produces oblique shock waves in the water, which focus at the bottom of the pipe due to the curvature of the walls. This results in peak pressures at the bottom of the pipe that are 4–6 times greater than the peak detonation pressure. Such pressure amplification is measured for water depths of 0.25, 0.5, 0.75, 0.87, and 0.92 pipe diameters. Focusing of the oblique shock waves is studied further by measuring the circumferential variation of pressure when the water depth is 0.5 pipe diameters, and reasonable agreement with theoretical modeling is found. Despite the local pressure amplification due to shock focusing, peak hoop strains decreased with increasing water depth. Failure of the detonation wave was not observed, even for water depths as high as 0.92 pipe diameters. Likewise, transition to detonation occurred for every water height.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetonation and Transition to Detonation in Partially Water Filled Pipes
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4023429
dc.journal.fristpage31203
dc.journal.lastpage31203
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record