Show simple item record

dc.contributor.authorGiraudeau, M.
dc.contributor.authorMureithi, N. W.
dc.contributor.authorPettigrew, M. J.
dc.date.accessioned2017-05-09T01:02:18Z
dc.date.available2017-05-09T01:02:18Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_3_030907.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153043
dc.description.abstractMomentum variation in twophase flow generates significant low frequency forces, capable of producing unwanted and destructive vibrations in nuclear or petroleum industries. Twophase flowinduced forces in piping were previously studied over a range of diameters from 6 mm to 70 mm in different piping element geometries, such as elbows, Ubends, and tees. Dimensionless models were then developed to estimate the rms forces and generate vibration excitation force spectra. It was found that slug flow generates the largest forces due to the large momentum variation between Taylor bubbles and slugs. The present study was conducted with a 52 mm diameter Ubend tube carrying a vertical upward flow. Twophase flowinduced forces were measured. In addition, twophase flow parameters, such as the local void fraction, bubble size and velocity, and slug frequency were studied to understand the relationship between the force spectra and the twophase flow patterns. A new twophase flow pattern map, based on existing transition models and validated using our own local void fraction measurements and force spectra, is proposed. This paper also presents a comparison of the present dimensionless forces with those of previous studies, thus covers a wide range of geometries and Weber numbers. Finally, a dimensionless spectrum is proposed to correlate forces with large momentum variations observed for certain flow patterns.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTwo Phase Flow Induced Forces on Piping in Vertical Upward Flow: Excitation Mechanisms and Correlation Models
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4024210
dc.journal.fristpage30907
dc.journal.lastpage30907
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record