Show simple item record

dc.contributor.authorTaniguchi, Tomoyo
dc.date.accessioned2017-05-09T01:02:15Z
dc.date.available2017-05-09T01:02:15Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_1_011304.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153025
dc.description.abstractAt the event of severe earthquakes, the tank rocking response appears subsequent to the tank bulging response. A springmassrigid body combined model was proposed for analyzing the tank response and the required quantities for the model have been rigorously defined based on the mathematical solution of fluid pressure on the tank accompanying the tank response of interest. To date, the apparent density of fluid for the rocking and the bulging responses and the effective mass of those are available for this purpose. However, observations revealed that the interaction between the rocking response and the bulging response is stimulated by the effective mass of fluid for the rocking–bulging interaction that is understood as a part of the effective mass of fluid for the tank bulging response that is also under the action of the rotational inertia. Therefore, regarding a ratio of the apparent density of fluid for the tank rocking response to the original density of fluid as the intensity of a contribution of fluid to the tank rocking response, the apparent density of fluid for the rocking–bulging interaction is defined intuitively and conveniently. The effective mass of fluid for the rocking–bulging interaction is subsequently defined. The distribution of the apparent density of fluid for the rocking–bulging interaction inside the tank is drawn for a combination of the various aspects of tank and the ratios of the uplift width of the tank bottom. The ratios of the effective mass of fluid for the rocking–bulging interaction to the total mass of fluid of the tank as well as the ratios of the arm length to the centroid of the effective mass of that to the tank geometry are also depicted by the same manner.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleContributions of Fluid to Rocking–Bulging Interaction of Rectangular Tanks Whose Walls Are Rigid and Bottom Plate Rectilinearly Uplifts
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4007286
dc.journal.fristpage11304
dc.journal.lastpage11304
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record