Show simple item record

dc.contributor.authorB‚achut, J.
dc.contributor.authorMuc, A.
dc.contributor.authorRy›, J.
dc.date.accessioned2017-05-09T01:02:14Z
dc.date.available2017-05-09T01:02:14Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_1_011205.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/153018
dc.description.abstractThe paper provides details about tests on six steel cones. Test models were machined from 250 mm diameter billet. All cones had substantial and integral top and bottom flanges in order to secure well defined boundary conditions. Experimental data were obtained for: (i) two cones subjected to axial compression, (ii) two cones subjected to external pressure, and (iii) the remaining two models subjected to combined action of external pressure and axial compression. Apart from axisymmetric modeling of tested cones, true geometry with true wall thickness was also used in calculations. Theoretical failure loads were obtained for: (i) elastic perfectly plastic, (ii) engineering stress–strain, and (iii) true stress–true strain modeling of steel. The latter approach coupled with measured geometry and wall thickness secured safe predictions of the collapse loads in all cases. Comparisons of experimental collapse loads with estimates given by ASME and ECCS design codes are included. It is seen here that the ASME and ECCS rules provide a safety margin of about 100% against the collapse (except 50% for axial compression in the case of the ECCS).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Buckling of Cones Subjected to Axial Compression and External Pressure
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006903
dc.journal.fristpage11205
dc.journal.lastpage11205
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record