Show simple item record

dc.contributor.authorGrine, Lotfi
dc.contributor.authorBouzid, Abdel
dc.date.accessioned2017-05-09T01:02:10Z
dc.date.available2017-05-09T01:02:10Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_2_021302.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152994
dc.description.abstractThe ability of a gasket to maintain tightness under different operating conditions has been studied extensively in recent years. However, most of the research studies conducted on leakage predictions was performed at room temperature. The aim of this work is to predict leakage through gaskets taking into account the effect of the temperature on the fluid properties and gasket internal structural characteristics. The analytical model of slip flow regime to evaluate the mass leak rates through a porous gasket developed by Grine and Bouzid (2011, “Correlation of Gaseous Mass Leak Rates Through Micro and NanoPorous Gaskets,â€‌ ASME J. Pressure Vessel Technol.) was used in this study. The results from the model were validated and compared with the experimental data obtained from tests conducted on the Universal Gasket Rig with two different gases (helium and nitrogen). The leak rates measured are in the range of 1 to 0.0001 mg/s, which are measurable using the pressure rise technique. As a second objective, the influence of the gasket displacements caused by stress and temperature on the flow leakage was studied. A relationship between displacement or void thickness and leakage is clearly demonstrated. The slip flow regime model is capable of predicting leakage at temperature with reasonable accuracy.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Leak Rates Through Porous Gaskets at High Temperature
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4023425
dc.journal.fristpage21302
dc.journal.lastpage21302
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record