Show simple item record

dc.contributor.authorKumar, S. Suresh
dc.contributor.authorPrakash, Raghu V.
dc.date.accessioned2017-05-09T01:02:07Z
dc.date.available2017-05-09T01:02:07Z
dc.date.issued2013
dc.identifier.issn0094-9930
dc.identifier.otherpvt_135_2_021202.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152984
dc.description.abstractThe fracture behavior of a crack in a threaded bolt depends on the stress intensity factor (SIF). Available SIF solutions have approximated the threaded bolt as a circular groove, thus, the SIF predominantly corresponds to the opening mode, modeI. As a thread in a bolt has a helix angle, the crack propagates under mixed mode conditions (opening, sliding and tearing), esp. when the crack sizes are small. This paper presents the results of SIF solutions for a partthrough crack emanating from a Metric threaded bolt. A 3D finite element model with preexisting flaws was generated to calculate the SIF values along the crack front. Crack aspect ratios in the range of (0.2 < (a/c) < 1) and crack depth ratios in the range of (0.1 < (a/d) < 0.5) (where “aâ€‌ is crack length, “câ€‌ is semi major axis of ellipse and “dâ€‌ is minor diameter of the bolt) were considered along the crack plane for the SIF estimation. The SIF values at the midregion decreases with an increase in aspect ratio (a/c), and SIF increases when the crack depth ratio (a/d) increases in the midregion. Close to the free edges, higher SIF values was observed for crack depth and aspect ratios ranging between 0.2 and 0.6 compared to midregion. In the crack surface region, up to a crack depth ratio of 0.25, significant influence of modeII and modeIII fracture was noted for shallow cracks (a/c < 0.2). Significant influence of modeII and modeIII fracture was observed for semicircular cracks (a/c = 1) beyond the crack depth ratio of 0.3.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Helix Angle on the Stress Intensity Factor of a Cracked Threaded Bolt
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4007290
dc.journal.fristpage21202
dc.journal.lastpage21202
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2013:;volume( 135 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record