Show simple item record

dc.contributor.authorGhadiri Moghaddam, Davood
dc.contributor.authorLePoudre, Philip
dc.contributor.authorBesant, Robert W.
dc.contributor.authorSimonson, Carey J.
dc.date.accessioned2017-05-09T01:00:11Z
dc.date.available2017-05-09T01:00:11Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_12_122002.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152282
dc.description.abstractA liquidtoair membrane energy exchanger (LAMEE) is an energy exchanger that allows heat and moisture transfer between air and salt solution flows through a semipermeable membrane. For the first time, a novel smallscale singlepanel LAMEE test facility is used to experimentally investigate the effect of the direction of heat and mass transfers for the air and salt solution flows, and the effect of different salt solution types and concentrations on the LAMEE effectiveness. The data for steadystate effectiveness of the LAMEE are compared to the simulation results of a numerical model. Two studies are conducted; first a study based on different heat and mass transfer directions (four test cases), and second a study focused on the influence of solution types and concentration on LAMEE performance. For the first study, NTU = 3 and four different heat capacity ratios (i.e., Cr* = 1, 3, 5, 7) are used, with a LiCl salt solution in the exchanger. Mass and energy balances for all the test cases and the repeatability of the experimental data for the air cooling and dehumidifying test case show that the experimental data are repeatable and within an acceptable uncertainty range. The results show increasing effectiveness with increasing Cr*, and good agreement between the numerical and experimental results for both air cooling and dehumidifying and air heating and humidifying test cases. In the second study, two different salt solutions (i.e., LiCl and MgCl2), and three different concentrations for the LiCl solution (i.e., 25%, 30%, and 35%) are selected to investigate the effect of different salt solution types and concentrations on the performance of the LAMEE. A maximum difference of 10% is obtained for the LAMEE total effectiveness data with the different salt solution types and concentrations. The results show that both the salt solution type and concentration affect the LAMEE effectiveness, and changing the concentration is one way to control the supply air outlet humidity ratio.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSteady State Performance of a Small Scale Liquid to Air Membrane Energy Exchanger for Different Heat and Mass Transfer Directions, and Liquid Desiccant Types and Concentrations: Experimental and Numerical Data
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024586
dc.journal.fristpage122002
dc.journal.lastpage122002
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record