Show simple item record

dc.contributor.authorKumar, C. S.
dc.contributor.authorReddy, K. P. J.
dc.date.accessioned2017-05-09T01:00:10Z
dc.date.available2017-05-09T01:00:10Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_12_121701.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152276
dc.description.abstractHeat transfer rates measured in front and to the side of a protrusion on an aluminum flat plate subjected to hypersonic flow at zero angle of attack are presented for two flow enthalpies of approximately 2 MJ/kg and 4.5 MJ/kg. Experiments were conducted in the hypersonic shock tunnel (HST2) and free piston driven HST3 at a freestream Mach number of 8. Heat transfer data was obtained for different geometries of the protrusion of a height of 4 mm, which is approximately the local boundary layer thickness. Comparatively high rates of heat transfer were obtained at regions of flow circulation in the separated region, with the hottest spot generally appearing in front of the protuberance. Experimental values showed moderate agreement with existing empirical correlations at higher enthalpy but not at all for the lower enthalpy condition, although the correlations were coined at enthalpy values nearer to the lower value. Schlieren visualization was also done to investigate the flow structures qualitatively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Heat Fluxes in the Vicinity of Protuberances on a Flat Plate at Hypersonic Speeds
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024667
dc.journal.fristpage121701
dc.journal.lastpage121701
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record