Show simple item record

dc.contributor.authorGodson Asirvatham, Lazarus
dc.contributor.authorNimmagadda, Rajesh
dc.contributor.authorWongwises, Somchai
dc.date.accessioned2017-05-09T01:00:07Z
dc.date.available2017-05-09T01:00:07Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_11_111011.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152263
dc.description.abstractThe paper presents the enhancement in the operational limits (boiling, entrainment, sonic, viscous and capillary limits) of heat pipes using silver nanoparticles dispersed in deionized (DI) water. The tested nanoparticles concentration ranged from 0.003 vol. % to 0.009 vol. % with particle diameter of <100 nm. The nanofluid as working fluid enhances the effective thermal conductivity of heat pipe by 40%, 58%, and 70%, respectively, for volume concentrations of 0.003%, 0.006%, and 0.009%. For an input heat load of 60 W, the adiabatic vapor temperatures of nanofluid based heat pipes are reduced by 9 آ°C, 18 آ°C, and 20 آ°C, when compared with DI water. This reduction in the operating temperature enhances the thermophysical properties of working fluid and gives a change in the various operational limits of heat pipes. The use of silver nanoparticles with 0.009 vol. % concentration increases the capillary limit value of heat pipe by 54% when compared with DI water. This in turn improves the performance and operating range of the heat pipe.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOperational Limitations of Heat Pipes With Silver Water Nanofluids
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024616
dc.journal.fristpage111011
dc.journal.lastpage111011
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record