Show simple item record

dc.contributor.authorKota, Krishna
dc.contributor.authorBurton, Ludovic
dc.contributor.authorJoshi, Yogendra
dc.date.accessioned2017-05-09T01:00:06Z
dc.date.available2017-05-09T01:00:06Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_11_111005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152257
dc.description.abstractThe objective of this effort is to pursue artificial microscale surface roughness features in the form of dimples, on the walls of an aircooled heat sink channel, as a passive option to energyefficiently augment heat transfer in forced convection flows. High fidelity numerical simulations were employed for realizing an optimized dimple configuration and to comprehend the behavior of microsized dimples under high velocity (∼17 m/s) transitional flow conditions. Fully developed flow simulations were performed, and design of experiments with response surface methodology was employed for the numerical optimization. The results showed ∼30% heat transfer improvement and ∼15% pressure drop increase in the fully developed region compared to a smoothwalled channel. Practicability of manufacturing 200 خ¼m deep dimples on a 600 خ¼m thin aluminum fin was demonstrated. Experiments were also carried out to assess the performance of the aforementioned optimized configuration in a custom built setup in the laboratory, which showed up to 10.5% heat transfer improvement and ∼12% pressure drop increase over a corresponding smoothwalled channel. The above results indicate that the performance of dimples is allied with the flow development characteristics. In addition, experiments performed at Reynolds numbers other than one at which the dimples were optimized showed inferior performance showing that applicationspecific optimization of dimples is crucial. With further exploration of shape and design parameters, dimples might have the potential to improve thermal performance passively and form an attractive candidate to realize highperformance aircooled heat sinks in the future.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePerformance of an Air Cooled Heat Sink Channel With Microscale Dimples Under Transitional Flow Conditions
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024598
dc.journal.fristpage111005
dc.journal.lastpage111005
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record